Motion Trigger Mode
The unit’s motion triggering modes uses a Passive Infrared(PIR) sensor.It detects movement of infrared(IR)
sources,such as humans or animals,from up to 5 meters(16.4 feet) away,and smaller wildlife at a closer range.
when the sensor detects IR motion within it’s field of view(Horizontal:94 degree,vertical:82 degree),it will trigger
your camera shutter.
Move the mode switch to Motion to activate motion triggering mode,For best result,adjust your camera’s settings
appropriate for your triggering situation before use,mount the device & your camera on a stand or a tripod for
Lighting Trigger Mode
It’s a great challenge to capturing lightning when it strikes.With this trigger,things goes much more easier.Once
the trigger detects a flash or burst of light,will activate the camera’s shutter within 0.1 ms.
For orperation in lightning mode,point the sensor & camera in the area you expecting a lightning flash.Attach your
trigger to a tripod or a stand for best result.
Move the mode switch to Lightning to activate lightning trigger mode.For best result,start at a 10 second exposure &
adjust your camera’s exposure settings while adjusting the strigger’s sensitivity using the dial on the left side of the
unit.Set your camera /Lens to manual focus.
Sound Trigger Mode
The sound trigger mode uses a insert microphone sensor.It trigger the camera once the microphone detect any
sound,such as snapping finger,clappintg hands,or voice from human/wildlife within approximately 2 meters.
Some suit situations like:breaking moment of glass,puncturing a ballon filled with water.
The device may not be able to detect stimuli through windows or other blockages
Make sure you camera/ lens is in manual focus mode
0.1ms response time from lightning event to shutter release
5m PIR passive motion triggering range capability when in Motion Mode;
Sound Trigger within approximately 2 meters
Power:IEC LR03 AAAx 2(not included)
Compatible with (just change the shutter release cable):
Canon Nikon Sony Olympus Fujifilm Panasonic